First Blog

I once heard this fancy word, "Blog" and did not know what it meant, let alone how to... So I decided to look and find out for myself... After looking through blogs, I've decided to write my own, so here it is... my first blog and the first post of it ...

Comments

Post a Comment

Popular posts from this blog

Juniper Aggregate Interfaces (LACP/No LACP)

Image
Last week, I was implementing link aggregation on Juniper EX Series switches (EX4200). I was moving them off HP switches and putting them into Juniper. We were moving VMWare ESX boxes, NetApp and some physical boxes, though the configuration is very simple, I would like to mention how to do those with these boxes. Points to remember: You will explicitly need to create “Aggregated Ethernet” interfaces on juniper You cannot have more than 64 AE interfaces on a single Virtual Chassis You cannot change the algorithm for load balancing between the multiple links. (If you are interested in the Junipers LAG algorithm read this ) Now having said this, lets look at the common steps, you need to create the Aggregated Ethernet interfaces on the Juniper. root@EX4200#set chassis aggregated-devices ethernet device-count  4 The above command will create 4 “ae” interfaces, after you commit, you should see ae0 – ae 3 created. You can have any value between 1 and 64 in the
Read more

HA Proxy for Exchange 2010 Deployment & SMTP Restriction

Image
Hi ... Sorry I have been away for some time doing some stuff, so I hadn't got a chance to update my blog. I thought I would share my recent experience of deploying an Open Source "Linux Load Balancer" (HA Proxy -  http://haproxy.1wt.eu/  ). This Load Balancer is amazing ... I have been able to do so much with it in the past, here is one of the very simple and effective solutions (Cost wise & Performance) that we gave to the client using this ... I worked with a friend M L N Rao , who was helping me out with the Exchange front of things. Please read on to see .... I have tried to explain how to do it as well as why ... let me know what you think in the comments ... So, here is what happened, Our Exchange Team deployed Microsoft Exchange Server 2010 at a clients location and decided to go with MS-NLB. The MS NLB (Network Load Balancer) is a Load Balancer for different Microsoft products like IIS Servers/ISA/TMG, etc but the truth be told more pain than good for ne
Read more

Configuring Multicasting with Juniper EX switches (Part 1)

Image
Configuring multicast routing using Protocol Independent Multicast in a all Juniper environment is as simple as the Cisco environment, but when I searched, I dint find good articles or KB’s explaining this, so I decided to write one. I am fairly certain that if you have searched and arrived at this post, you know the basics of multicasting and IGMP, but yet, for the benefit of all readers, I will in brief describe the need for multicast. Please note, that this is just the IPv4 version of the story presented in a understandable manner and not all aspects of multicast are covered, but only the ones needed for this post. What is Multicast ? In IPv4 we have 3 kinds of packets, Unicast – One Source, One Destination Broadcast – One source and all destinations Multicast – One source and many destinations Now, all of us are familiar with the first one, we use it almost every minute we are on a network connected equipment. To, explain all this, lets choose different
Read more